Telecom
Heat Shrink Medium / Heavy Wall Tubes
Gala’s Heat Shrinkable Medium/Heavy wall Tubes are used in the installation of Fibre Optic Closure. These Tubes are designed to insulate & seal the inlet of Cable to the base of Fibre Optic closure. It is manufactured from high quality cross-linked polyolefin material.
Heat Shrink Wrap Around Sleeve
Gala’s Heat Shrink Wrap Around Sleeves coated with black mastic is used for the sealing and corrosion protection of pipeline joints and other substrates. This Sleeve protects against a range of challenges, including corrosion, extreme temperatures, mechanical damage and more.
Branch Off Clip
Gala’s Branch Off Clip is mainly used in Telecom Cable Jointing Kits. It is used to separate 2 cores of the cable that are coming out of the joint. Its outer surface is covered with a hot melt adhesive layer.
Heat Shrink Low Voltage Cable Breakouts
Gala’s Heat Shrink Low Voltage Cable Breakouts provides a strong and permanent environmental seal to the crutch of 2, 3, 4, 5, 6 and 7 core PVC, XLPE Rubber and PILC cables upto 3.3 KV rated voltage. The Breakouts are Manufactured form high quality cross-linked polyolefin material that offer an exceptional insulation and long term service reliability.
Printable Marker Sleeve
Mastic Tape is a cold-applied butyl sealant designed for use in Cable Joint and Termination kits to offer excellent water sealing and weatherproofing.
Cold Shrink Breakout
Gala Cold Shrink Breakout are factory expanded and assembled onto a removable core. It provides sealing protection or multi core cable crutch. The insulating cable breakout is made of high quality EPDM Rubber which does not contain chloride or sulfur. It covers wide range of cable sizes.
Cold Shrink Tubing - EPDM
Gala Cold Shrink Tube are open ended, tubular rubber sleeves that are factory expanded and assembled onto a removable core. The core is removed after the tube has been position for installation over and inline connection, terminal lug etc.
Cold Shrink Tubing Silicon
Gala Cold Shrink Tube are open ended, tubular Silicone sleeves that are factory expanded and assembled onto a removable core. The core is removed after the tube has been position for installation over and inline connection, terminal lug etc
Heat Shrink Cable End Caps
Gala’s Heat Shrink Cable End Caps are designed to provide Mechanical protection and environmental seal to Power cable ends. It provides a temper proof sealing to cable ends to avoid claims due to cable pilferage.
Cold Shrink End Cap
Cold Shrink End Cap is used to seal the ends of all types of Cables & protect from ingress of water / moisture. The caps are manufactured from high quality EPDM Rubber compatible with most commonly used Cable Jackets i.e. XLPE, PVC, PILC or Rubber Sheathed Cable.