Skip links

Mastic Tape

Home / Mastic Tape

Mastic Tape is a cold-applied butyl sealant designed for use with Gala Heat Cable Joint and Termination kits to offer excellent water sealing and weatherproofing.

Black Mastic (HBMT):

Black mastic is suitable for LV and MV applications. It is used for sealing and waterproofing of electrical installations such as joints and terminations, as well as in telecom installations.

Red Mastic (HRMT):

Red mastic is used in MV terminations to ensure a watertight seal on breakout boots, non-tracking tube and on lugs.

Yellow Stress Control Mastic (HSCM):

Stress relief void filling mastic is used on connectors and at screen cuts when doing medium voltage joints and termination installations.

Features & Benefits

Diagram

Selection Chart

Selection Chart
Gala Code W Min. (mm) L Min. (mm) T (±5%) (mm) Form
HBMT – 01 35 100 2.5 Strips
HBMT – 02 35 200 2.5 Strips
HBMT – 03 35 350 2.5 Strips
HBMT – 04 35 400 2.5 Strips
HBMT – 05 35 450 2.5 Strips
HBMT – 06 35 1000 2.5 Roll
HBMT – 07 35 2000 2.5 Roll
HBMT – 08 35 150 2.5 Roll
HBMT – 10 35 300 2.5 Strips
HBMT – 11 35 600 2.5 Roll
HBMT – 13 40 2000 2.5 Roll
HBMT – 14 35 25 mtr 2.5 Roll
HBMT – 15 35 250 2.5 Strips
HBMT – 17 50 20 mtr 1.3 Roll
HBMT – 18 30 20 mtr 1.3 Roll
HBMT – 19 50 500 2.5 Roll
HRMT – 01 35 100 1.7 Strips
HRMT – 02 35 200 1.7 Strips
HRMT – 03 35 150 1.7 Strips
HRMT – 04 35 400 1.7 Strips
HRMT – 05 35 450 1.7 Strips
HRMT – 08 35 300 1.7 Strips
HRMT – 10 25 300 1.7 Strips
HRMT – 11 25 450 1.7 Strips
HRMT – 14 25 300 1.2 Strips
HRMT – 16 25 450 1.2 Strips
HRMT – 18 35 1000 1.7 Roll
HRMT – 19 35 25 mtr 2.5 Roll
HRMT – 20 50 400 1.7 Strips
HRMT – 21 25 500 0.7 Roll
HRMT – 22 20 600 1.7 Roll
HRMT – 24 20 150 2 Strips
HRMT – 25 35 600 1.7 Roll
HSCM – 06 20 100 1.7 Strips
HSCM – 09 25 450 1.7 Strips

W: Width  |  L: Length  |  T: Thickness

Technical Specification

Technical Specification
Properties Standard Typical Value
Black Red Yellow
Tensile Strength (MPa) ASTM D638 0.1 (min.) 0.5 (min.) 0.1 (min.)
Ultimate Elongation (%) ASTM D638 300 (min.) 300 (min.) 300 (min.)
Density (gm/cm³) ASTM D792 1.30 ± 0.2 1.20 ± 0.2 1.30 ± 0.2
Service Temp. (°C) IEC 216 -20 to +90 -20 to +90 -20 to +90
Dielectric Strength (kV/mm) ASTM D149 6 (min.) 10 (min.) 15 (min.)
Volume Resistivity (Ohm.cm) ASTM D257 1 x 10¹⁰ (min.) 1 x 10¹⁴ (min.) 1 x 10⁹ (min.)
Dielectric Constant ASTM D150 2 – 3 3 (max.) 10 (min.)
50 Hz Loss Factor 0.035 0.035 0.035
Adhesive & Self-amalgamation Good Good Good

Certificates

FAQs

1. What is a Heat Shrink Shroud?

A Heat Shrink Shroud is a protective sleeve made from cross-linked polymer material that shrinks when heat is applied. It provides insulation, sealing, and mechanical protection for cables, joints, and terminations.

When heat is applied using a heat gun or torch, the shroud shrinks uniformly and tightly wraps around the cable or joint, creating a secure and sealed covering.

When heat is applied using a heat gun or torch, the shroud shrinks uniformly and tightly wraps around the cable or joint, creating a secure and sealed covering.

It is typically made from cross-linked polyolefin material, often containing carbon black for UV resistance and weather protection.

Related Products

Polyolefin Overhead Line Cover

Polyolefin Overhead Line Cover

Polyolefin Overhead Line Cover

109+

Countries

Served

40+

Years

In Industry

1250+

Kw

Solar Generative

225000

Area

Sq ft

This site is registered on portal.liquid-themes.com as a development site. Switch to production mode to remove this warning.