Bushing Boots
Table of Content
Bushing Boots are non-tracking elastomeric insulating boots which are used in conjunction with terminations. They fit over the bushings of switchgear, insulating the area between the cable connector in either right angled or straight bushing connections. They are designed to enhance the phase-to-phase and phase-to-earth insulation. The boots can be used up to 25 KV application & protect against flashover or surges induced in switchgear & transformer boxes.
Diagram
Selection Chart
| Production Code | Total Length | ID – Bushing Entry | ID – Cable Entry | Thickness |
|---|---|---|---|---|
| GSBB – 1 | 230 mm (min.) | 50.5 mm (min.) | 17.5 mm (min.) | 2.5 mm (min.) |
| GSBB – 2 | 230 mm (min.) | 50.5 mm (min.) | 22.0 mm (min.) | 2.5 mm (min.) |
Technical Specification
| AC High Voltage | Basic Impulse Level | DC High Voltage | Bushing Diameter |
|---|---|---|---|
| 35 kV for 5 Minute | 95.0 kV | 48 kV for 30 Minute | 46 – 70mm |
Certificates
FAQs
1. What is a Screened Separable Connector?
A Screened Separable Connector is a medium-voltage cable accessory used to connect power cables to transformers, switchgear, or other equipment. It is fully screened and separable, allowing safe installation, disconnection, and maintenance.
2. What voltage levels are Screened Separable Connectors used for?
They are commonly used for 3.6 kV to 36 kV medium-voltage applications, depending on the connector design and standards.
3. Where are Screened Separable Connectors typically used?
Related Products
Polyolefin Overhead Line Cover
Polyolefin Overhead Line Cover
Polyolefin Overhead Line Cover
Enquiry
109+
Countries
Served
40+
Years
In Industry
1250+
Kw
Solar Generative
225000
Area
Sq ft