Skip links

Semi Conductivecable Breakout

Home / Semi Conductivecable Breakout

Insulcore – semi conductive is used for PILC belted cable to seal the crutch area as well as to provide individual screening to each core.

The breakout is made from high quality cross linked semi conductive polyolefin material. The breakouts are internally coated with water resistant red mastic

Diagram

Selection Chart

SELECTION CHART
Code No. of Core D d L l Tb Tc
s f s f s f s f
min. max. min. max min. min min. min. ±10% ±10%
GCB-0820 3 55 20 25 8 160 188 52 62 3.3 2.7
GCB-1330 3 80 30 36 13 185 215 60 75 3.6 3.3
GCB-1330A 3 95 30 39 13 170 215 55 75 3.6 3.3
GCB-2145 3 110 45 55 20 190 230 65 90 3.5 2.9
GCB-2145A 3 125 45 55 21 175 230 60 90 3.5 2.9
GCB-2755 3 140 56 68 29 200 250 75 90 3.5 3.9
GCB-2755A 3 170 56 70 29 180 255 70 90 3.5 3.9

D : Internal Diameter ; s : as supplied ; f : after free recovery ; Tb,Tc : Thickness of body & core

Technical Specification

Technical Specification
Properties Value standard
Physical
Tensile Strength 12 N/mm² (MPA)(min.) ASTM D638
Ultimate Elongation 300% (Min.) ASTM D638
Density 1.10 + 0.2 gm/cm³ ASTM D792
Hardness 45 + 10 Shore D ASTM D2240
Water Absorption 0.5 % (max.) ASTM D570
Thermal
Accelerated Ageing (120°C for 500 Hrs) ASTM D2671
Tensile Strength 11 N/mm² (Mpa) (min.) ASTM D 638
Ultimate Elongation 250% (Min.) ASTM D638
Heat Shock (250°C for 30 Min.) No Cracking or flowing ESI 09-11
Shrink Temperature 125°C IEC 216
Continuous Temperature limit -40°C to + 100°C IEC 216
Electrical
Volume Resistivity 1 x 10⁷ Ohm.cm(min.) ASTM D257

Related Products

Polyolefin Overhead Line Cover

Polyolefin Overhead Line Cover

Polyolefin Overhead Line Cover

109+

Countries

Served

40+

Years

In Industry

1250+

Kw

Solar Generative

225000

Area

Sq ft

This site is registered on portal.liquid-themes.com as a development site. Switch to production mode to remove this warning.