Skip links

Heat Shrink Anti-Tracking Breakout

Home / Heat Shrink Anti-Tracking Breakout

Diagram

Selection Chart

SELECTION CHART
Code No. of Core D d L l Tb Tc
s f s f s f s f
min. max. min. max min. max min. min. +10% +10%
GAB-0820 3 60 20 25 8 160 184 45 60 3.3 2.7
GAB-0820 A 3 70 20 27 8 155 184 40 60 3.3 2.7
GAB-1330 3 80 30 39 13 185 215 60 75 3.6 3.3
GAB-1330 A 3 100 30 39 13 185 215 60 75 3.6 3.3
GAB 2145 3 110 45 55 21 200 235 70 88 3.5 2.9
GAB-2145 A 3 125 45 55 21 195 235 65 88 3.5 2.9
GAB-2755 3 140 56 68 28 215 260 80 95 3.5 3.9
GAB-2755 A 3 180 56 70 29 205 260 80 95 3.5 3.9

D : Internal Diameter ; s : as supplied ; f : after free recovery ; Tb,Tc : Thickness of body & core

Technical Specification

Technical Specification
Properties Value standard
Physical
Tensile Strength 12 N/mm² (MPa) (Min.) ASTM D638
Ultimate Elongation 350% (Min.) ASTM D638
Density 1.15 ± 0.2 gm/cm³ ASTM D792
Hardness 45 ± 10 Shore D ASTM D2240
Water Absorption 0.5% (Max.) ASTM D570
Thermal
Accelerated Ageing (120°C for 500 Hrs) ASTM D2671
Tensile Strength 11 N/mm² (MPa) (Min.) ASTM D638
Ultimate Elongation 300% (Min.) ASTM D638
Low Temperature Flexibility (-40°C for 4 Hrs.) No Cracking ASTM D2671
Heat Shock (250°C for 30 Min.) No Cracking or Flowing ESI 09-11
Shrink Temperature 125°C IEC 216
Continuous Temperature Limit -40°C to +100°C IEC 216
Electrical
Dielectric Strength 12 KV/mm (Min.) ASTM D149
Volume Resistivity 1 × 1014 Ohm·cm (Min.) ASTM D257
Dielectric Constant 5 (Max.) ASTM D150
Resistance to Tracking & Erosion No tracking, erosion or flame failure up to 3.25 KV for 20 min. ASTM D2303

Related Products

Polyolefin Overhead Line Cover

Polyolefin Overhead Line Cover

Polyolefin Overhead Line Cover

109+

Countries

Served

40+

Years

In Industry

1250+

Kw

Solar Generative

225000

Area

Sq ft

This site is registered on portal.liquid-themes.com as a development site. Switch to production mode to remove this warning.