Heat Shrinkable Cable Terminations
Home / Heat Shrinkable Terminations
Products
- Heat Shrinkable Joints & Terminations
- Insulation Enhancement Product
- Screened Separable Connectors
- Heat Shrinkable Moulded Shapes
-
Heat Shrink Tubes / Sleeves
- Advantages Of Heat Shrink Tubing
- Thin Wall Tubes
- GDW : Dual Wall Tubing
- Medium/Heavy Wall Tubes-Commercial
- Heat Shrink Co-extruded Tubing Premium Quality
- Red Insulation Tubes
- Non Tracking Tubes
- Busbar Sleeves
- Stress Control Tube
- Non Tracking Tubes
- Integrated Stress Control Tube-GVOT Tube
- Heat Shrink Double Layer Tube-GDTL Tube
- High Shrink Ratio Heat Shrink Tube
-
Switchgear Insulation Products
- Barrier Board Sheet
- End Sealing Kit for Extensible RMU/GIS Bushing
- Heat Shrink Bus Bar Sleeve
- Bus Bar Insulating Shrouds
- Bus Bar Insulating Shrouds Polyolefin
- Bus Bar End Caps
- Thin wall tube wire marking
- Heat Shrink Tape (Bustape)
- Insulation for Circuit Breakers
- Busbar Sleeve for 66 kV
- Bushing Boot
- Non Shrinkable High Voltage Tape
- Heat Shrinkable Gland
- Cable Sealing & Repair Products
- Silicone Overhead Line Cover
- Polyolefin Overhead Line Cover (Insulcover)
- Overhead Line Tube (Insulcover)
- Pipeline / Corrosion / Cathodic Protection Products
- Pole Protection Products
- Wire Harness Products
- New Products
- Miscellaneous
Cable Terminations - GXO/E - 3336 - Series Heat Shrinkable Terminations Suitable for 3 Core XLPE/EPR Insulated Cables For 36kV
Descriptions : GXO / E – 1524 – Series Class I termination kits are Heat Shrinkable termination kits designed for 3 Core extruded dielectric, shielded. armoured & unarmoured 24 KV rated voltage (8.7KV/15KV, 11kV/11kV, 12.7/22kV, Umax=24KV).
Cable Components
| Descriptions |
|---|
| Conductor |
| Insulation |
| Semi Conducting Screen |
| Metal Shield |
| Outer Sheath |
| Armour |
| Inner Sheath |
Kit Components
| Descriptions | Qty |
|---|---|
| Terminal Sleeve | 3 Nos. |
| Non-Tracking Weather Resistant Tubing | 3 Nos. |
| Stress Control Tubing | 3 Nos. |
| Rain Shed | 6 Nos |
| Non-Tracking Cable Break Out | 1 No. |
| Tinned Copper Earth Braid | 1 No. |
| Worm Drive Clips | 2 Nos. |
| Mastic Sealing Tape | 1 Roll. |
| Terminal Lug | 3 Nos. |
| Lug Sealing Tape | 3 Nos. |
| Stress Control Mastic | 3 Nos. |
Installation aids & Accessories (Part of std. Kits)
| Descriptions | Qty |
|---|---|
| Armour Earthing Arrangement (Tinned Copper Braid + Back Up Ring + Jubilee Clamp) | 1 Set. |
| Metal shield Earthing arrangement (Small Copper Braid + Solder + Flux) | 1 Set. |
| Silicone Grease | 3 Nos. |
| Cleaning Tissue | 3 Nos. |
| Nylon String for Cutting XLPE Insulation | 1 No. |
| Aloxite Emery Tape | 3 Nos. |
| Mopping Cloth | 1 No. |
| Installation Instruction Manual | 1 No. |
Electrical Performance (12 kV Rated Accessories)
| Tests | Requirement Test Value | GXO/E-112-Series |
|---|---|---|
| AC Withstand 1 Minute | 35KV | Pass |
| DC Withstand 30 Minute | 48 KV | Pass |
| Discharge Extintion Voltage (< 5Pc.) | 12.7 KV | >12.7kV |
| Impulse Withstand (Crest kV) | 75 kV | >75 kV |
| Continuous Current Rating | As Per Cable | As Per Cable |
Accessories and optional items
- Standard Tail Length is 600mm for outdoor and 450mm for indoor terminations. Special tail lengths available on request.
- Solderless and special purpose earthing kits also available on request.
- Polymeric Insulators and T Brackets for installation of terminations on single pole are available on request.
- Temperature sensitive paint changes colour when heat shrinking process is complete.
Note :-
- All kits are supplied with full kit contents for making a termination.
- All Indoor Kits are supplied without rain sheds.
Ordering Informations
| Cable size (sq. mm) | Outdoor Kit Code | Indoor Kit Code |
|---|---|---|
| 25-50 | GXO-31 | GXE-31 |
| 70-95 | GXO-32 | GXE-32 |
| 120-185 | GXO-33 | GXE-33 |
| 240-400 | GXO-34 | GXE-34 |
109+
Countries
Served
40+
Years
In Industry
1250+
Kw
Solar Generative
225000
Area
Sq ft