Self Fusing Tape
Gala Self Fusing Tape is electrical tape made of premium grade silicone rubber. It is an ideal tape for
insulation protection in the power industry, suitable for Extra High voltage and can work continuously
at H-class high temperature 180°C. The tape has good insulation, moisture resistant, flame retardant
and sealing property.
Features & Benefits
- Excellence insulation, ozone, UV and aging resistant.
- Easy to install by hand, no need heating and special tools.
- High reliability with excellent physical, chemical and electrical property.
- Self fusing without adhesive, removed without residue, convenient for maintenance.
- Flame retardant.
- Mechanical vibration reduction.
- Colour : Grey
Diagram
Selection Chart
| Gala Code | Width (mm) | Thickness (mm) | Length (m) |
|---|---|---|---|
| GSSFT-01 | 63.5 ± 1.5 | 0.76 ± 0.05 | 11 ± 0.2 |
* Self fusing tape required quantity depends on the conductor size.
Technical Specification
| Properties | Typical Value | Test Method |
|---|---|---|
| Tensile Strength | ≥ 5.5 N/mm² (MPa) | ASTM D412 |
| Elongation | ≥ 300% | ASTM D412 |
| Hardness | 40 ± 5 Shore A | ASTM D2240 |
| Continuous Operating Temperature | -60°C to 250°C | IEC 216 |
| Dielectric Strength | ≥ 25 kV/mm | ASTM D149 |
| Density | ≥ 1.1 g/cm³ | ASTM D792 |
| Volume Resistance | 1 x 10¹⁴ Ohm.cm (min.) | ASTM D257 |
Appliation Range
- Insulation protection to substation, bare parts of the power plant and bus-bar in main network.
- Insulation and fireproof for large cables and irregular shape conductor.
- Insulation protection for power system in places where fire can’t be used, like mine, oil field and chemical industry.
- Insulation protection and fireproof of cable joint and bus-bar.
Certificates
FAQs
1. What is a Heat Shrink Shroud?
A Heat Shrink Shroud is a protective sleeve made from cross-linked polymer material that shrinks when heat is applied. It provides insulation, sealing, and mechanical protection for cables, joints, and terminations.
2. How does a Heat Shrink Shroud work?
When heat is applied using a heat gun or torch, the shroud shrinks uniformly and tightly wraps around the cable or joint, creating a secure and sealed covering.
When heat is applied using a heat gun or torch, the shroud shrinks uniformly and tightly wraps around the cable or joint, creating a secure and sealed covering.
3. What material is Heat Shrink Shroud made of?
It is typically made from cross-linked polyolefin material, often containing carbon black for UV resistance and weather protection.
Related Products
Polyolefin Overhead Line Cover
Polyolefin Overhead Line Cover
Polyolefin Overhead Line Cover
Enquiry
109+
Countries
Served
40+
Years
In Industry
1250+
Kw
Solar Generative
225000
Area
Sq ft