Overhead Line Tube (Insulcover)
Home / Overhead Line Tube (Insulcover)
Products
- Heat Shrinkable Joints & Terminations
- Insulation Enhancement Product
- Screened Separable Connectors
- Heat Shrinkable Moulded Shapes
-
Heat Shrink Tubes / Sleeves
- Advantages Of Heat Shrink Tubing
- Thin Wall Tubes
- GDW : Dual Wall Tubing
- Medium/Heavy Wall Tubes-Commercial
- Heat Shrink Co-extruded Tubing Premium Quality
- Red Insulation Tubes
- Non Tracking Tubes
- Busbar Sleeves
- Stress Control Tube
- Non Tracking Tubes
- Integrated Stress Control Tube-GVOT Tube
- Heat Shrink Double Layer Tube-GDTL Tube
- High Shrink Ratio Heat Shrink Tube
-
Switchgear Insulation Products
- Barrier Board Sheet
- End Sealing Kit for Extensible RMU/GIS Bushing
- Heat Shrink Bus Bar Sleeve
- Bus Bar Insulating Shrouds
- Bus Bar Insulating Shrouds Polyolefin
- Bus Bar End Caps
- Thin wall tube wire marking
- Heat Shrink Tape (Bustape)
- Insulation for Circuit Breakers
- Busbar Sleeve for 66 kV
- Bushing Boot
- Non Shrinkable High Voltage Tape
- Heat Shrinkable Gland
- Cable Sealing & Repair Products
- Silicone Overhead Line Cover
- Polyolefin Overhead Line Cover (Insulcover)
- Overhead Line Tube (Insulcover)
- Pipeline / Corrosion / Cathodic Protection Products
- Pole Protection Products
- Wire Harness Products
- New Products
- Miscellaneous
❮
❯
×
Overhead Line Tube is a Medium Voltage Line Cover that provides insulation for overhead conductors to help prevent electrical outages caused by trees or wildlife coming into the contact with distribution lines. It is manufactured from high quality Non Tracking Polyolefin material.
Features and Benefits
- High Di-electric strength
- Excellent UV stabilized & weather resistant
- Tracking & Erosion resistant
- Prevent Conductor from Chemical corrosion effected by strong acid, alkali, salt etc.
- Halogen free.
- Flame retardant.
Diagram
Selection Chart – GOT-M (Upto 11kV)
Selection Chart – GOT-M (Upto 11kV)
| Gala Code | Internal Diameter (mm) (Min.) | Thickness (mm) (±10%) | Packaging (Mtr./Roll) |
|---|---|---|---|
| GOT-M 18 | 18.0 | 1.0 | 50 |
| GOT-M 25 | 25.0 | 1.0 | 50 |
| GOT-M 35 | 35.0 | 1.0 | 50 |
Selection Chart – GOT-H (Upto 33kV)
Selection Chart – GOT-M (Upto 33kV)
| Gala Code | Internal Diameter (mm) (Min.) | Thickness (mm) (±10%) | Packaging (Mtr./Roll) |
|---|---|---|---|
| GOT-H 18 | 18.0 | 2.5 | 50 |
| GOT-H 25 | 25.0 | 2.5 | 50 |
| GOT-H 35 | 35.0 | 2.5 | 50 |
Technical Specification
Technical Specification
| PROPERTIES | VALUE | TEST METHOD |
|---|---|---|
| Tensile Strength | 10 N/mm² (MPa) (Min.) | ASTM D638 |
| Ultimate Elongation | 350% (Min.) | ASTM D638 |
| Density | 1.20 ± 0.2 gm/cm³ | ASTM D792 |
| Hardness | 30 ± 5 Shore D | ASTM D2240 |
| Water Absorption | 0.5% (Max.) | ASTM D570 |
| Accelerated Ageing | (90°C for 7 Days) | ASTM D2671 |
| a. Tensile Strength (After Ageing) | ±25% Variation | ASTM D638 |
| b. Ultimate Elongation (After Ageing) | ±25% Variation | ASTM D638 |
| Low Temperature Flexibility (-40°C / 4 hrs.) | No Cracking | ASTM D2671 |
| Continuous Temperature Limit | -45°C to +105°C | — |
| Dielectric Strength | 20 kV/mm (Min.) | ASTM D149 |
| Volume Resistivity | 1 × 10¹⁴ Ohm·cm (Min.) | ASTM D257 |
| Dielectric Constant | 5 (Max.) | ASTM D150 |
Related Products
Polyolefin Overhead Line Cover
Polyolefin Overhead Line Cover
Polyolefin Overhead Line Cover
Enquiry
109+
Countries
Served
40+
Years
In Industry
1250+
Kw
Solar Generative
225000
Area
Sq ft