Heat Shrink Wrap Around Sleeve
Home / Heat Shrink Wrap Around Sleeve
❮
❯
×
![]()
Insulsleeve is a Cross-linked polyolefin ‘tube’ which is folded around the cable/pipe, zipped up with a stainless steel channel and then heat shrunk.
Shut down ofsystem not required for repair.
Hotmelt adhesive provides complete environmental sealing and insulation according to IP 68 (Ingress Protection.)
High resistance to UV rays, chemicals, corrosion, fungus etc.
Temperature sensitive paint changes colour when heat shrinking process is complete.
Maximum length available upto 1500 mm.
GLC Series :
- Light duty wire harnessing for electrical & electronic applications.
- Provides electrical insulation and protection for in-line components.
- Used as strain relief for electrical wire connection.
- Bus-bar insulation for switchgear.
General Product Properties
- Halogen free
- For Electrical Insulation up to 3.3 kV
- Resistance to chemical, copper corrosion and fungus
- Standard Color: Black
- Shrink ratio 2:1
- UV stabilized
- Meets RoHS Compliance
Specifications
MIL-1-23053/5 Class 2 & 3,Ul224 (File no.E328193) 125C VW1, CSA C22.2
Diagram
Selection Chart
Selection Chart
| Gala Code | Diameter (D) | Thickness (±10%) | Application | |
|---|---|---|---|---|
| Supplied | Recovered | (recovered) | Cable Range | |
| GWS – 55/8 | 55 | 8 | 2.7 | 42 – 10 |
| GWS – 76/18 | 76 | 18 | 2.7 | 62 – 22 |
| GWS – 105/28 | 105 | 28 | 2.7 | 85 – 35 |
| GWS – 140/35 | 140 | 35 | 2.7 | 105 – 45 |
| GWS – 160/55 | 160 | 55 | 2.7 | 130 – 58 |
| GWS – 190/46 | 190 | 46 | 2.7 | 150 – 60 |
| GWS – 240/50 | 240 | 50 | 2.7 | 200 – 70 |
Technical Specification
Technical Specification
| PROPERTIES | VALUE | STANDARD |
|---|---|---|
| Physical | ||
| Tensile Strength | 10 N/mm² (Mpa) (min.) | ASTM D638 |
| Ultimate Elongation | 200 % (min) | ASTM D638 |
| Water Absorption | 0.15 % (max.) | ASTM D570 |
| Longitudinal Change | -10% (max.) | ASTM D638 |
| Thermal | ||
| Operating Temperature | -55 to +125°C | IEC 216 |
| Low Temperature Flexibility (-55°C for 4 hrs.) | No Cracking | ASTM D2671 |
| Electrical | ||
| Dielectric Strength | >15 kV/mm. | ASTM D2671 |
| Di-electric Constant | 5.0 (max.) | ASTM D150 |
| Volume Resistivity | 1 x 10¹⁴ Ohm.cm (min) | ASTM D257 |